Talking About Recycling

Breathing New Life Into Old Appliances Through Recycling

Recycling has become a part of our lives and with good reason. There are so many better ways to deal with metals, plastics, and other reusable materials than to just bury them under mountains of dirt. So how about those old appliances that you are pulling out of your home when you remodel? Did you know those can be recycled too?

Damaged Doesn’t Mean Worthless

A refrigerator that doesn’t work anymore may not necessarily be trash. In fact, some of the parts may be useful to help rebuild or repair other similar refrigerators. In some cases, an appliance repair shop may take your old appliances for parts or even buy them for a small amount of money to use the parts. Just because it is not working for you, doesn’t mean it can’t be used somehow. The compressor from your fridge maybe just the part needed to fix one that the repairman has been working on, or maybe he has a part to fix yours and can resell the appliance at a low price to a family in need or for a small profit to help keep his business going. You just never know what might help.

No Good Parts Does Not Mean No Good

In some cases, the parts from an old appliance are where the value is but if there are no usable parts in the appliance, the materials that the appliance if made from may be where the value comes in. Copper, aluminum, and steel all have value and it just so happens, most appliances are made from a combination of those materials. Recycling the materials from the appliance may bring more money to the recycler than the parts would to a repair shop and because of this, many recyclers will pay a small fee for the appliance as a whole unit.

Getting That Appliance Picked Up

Not every area has a great place to recycle appliances like a scrap yard or appliance repair shop. In fact, some places getting rid of the appliance can be tough to do at all. This is the time when you should consider a clean up service or junk removal company. They will not likely give you money for the appliance but they will haul; it away and save you the headache of dealing with it. They bring the truck, manpower, and knowledge of where to take that appliance. All you have to do is call.

Any way you look at it, if you are keeping the old appliances out of the landfill is a bonus and if it can be used to help someone else, how can you go wrong?

Learn More

3 Easy Tips To Save On Dumpster Rental Costs

If you’re planning on a home renovation project such as remodeling your bathroom or putting up new floor tiles, you may need to hire a dumpster rental to take care of the waste generated. Renting a dumpster could also come in handy if you want to de-clutter your house or remove yard waste.

This will save you time by giving you an easy way to deal with the waste other than having to transport it to a landfill yourself. Unfortunately, renting a dumpster can prove quite costly if you go at it blindly. This article looks at different tricks you can use to lower the cost of renting a dumpster.

Seal the dumpster 

Extra weight on your bin could result in additional charges from the dumpster rental service, so you may want to keep unnecessary items out of your dumpster. Pests such as rats, raccoons or even birds could crawl into an open dumpster, adding a lot of extra weight. Placing a trap on the bin could keep such pests out and save you money and the prospect of horrible smells from dead animals or animal droppings.

Furthermore, a trap can prevent rainwater from weighing down your bin, especially if you are disposing old mattresses, carpets and soft furniture that could soak up a lot of water. 

Follow the rules

Typically, there are certain rules that apply to the use of dumpster rentals. Following the rules could help you avoid piling up extra charges on your dumpster rental bill. For instance, you aren’t supposed to overload your dumpster or go above the fill line. You may be able to reduce the weight by keeping heavy items such as rocks or old floor tiles out of the rental bin and dumping them in your curbside garbage bin instead. 

You should also return the dumpster before the deadline on your rental contract and avoid putting toxic items such as old car batteries in the bin. 

Rent during a non-peak period 

Dumpster rentals are typically more expensive to rent during peak times such as weekends or during spring when many people are renovating their homes or doing some spring cleaning. If you can be flexible on the time to do that kitchen remodeling or waste removal and reschedule to a weekday or other non-peak time, you may be able to save money as demand on the dumpsters will probably be lower.

If you must rent your dumpster during a peak time, consider splitting the cost with a neighbor, especially if you just have a small amount of waste to get rid of. 

Contact a facility like Lakeshore Recycling for more information.

Learn More

What Can You Expect When You Recycle A Car?

If you have a car that you no longer want, you may be thinking of recycling it. Recycling is a good option if the car isn’t running or is too damaged to sell. Recycling a car has many benefits for both you and the environment, but you are probably wondering what happens to your car during the recycling process. Here’s what to expect.

A Quick Note

Once you decide to recycle your car, you will either be donating it or selling it, depending on your area, the options around you, and your car. Once you hand it over to the recycler, your part is done, and you don’t have to worry about doing anything more or waiting on anything. You will be paid if you sold it or thanked if you donated it. Still, people are curious as to what happens to their car at a recycler.

If the vehicle is in good shape, it can be cleaned up and repaired and is then sold at auction as a used car.

Getting the Vehicle Ready to Recycle

The recycler will drain all of the fluids from your vehicle and dispose of them. Additionally, the remaining hazardous parts are removed, like the battery and parts that contain lead. The tires are removed and are recycled separately from the vehicle.

A professional will then go over your vehicle and remove any parts that they can. These parts are then cleaned or restored and sold as used parts to other drivers.

Recycling the Vehicle

Once the car is cleaned of any hazards and anything useable, the car is fed into a crusher. The crusher does just what its name indicates: crushes the car flat. The crushed car is then fed into a shredder that is able to separate the metal parts based on their ferrous content. If there is any residue from the shredder, such as plastic or glass, the material is thrown away.

The metal that is left is melted down to make metal components or new metal. Sometimes it is sent to other companies for use during this process.

That’s what you can expect to experience when you recycle your car. You can see that your part is really simple. Just find someone who will take the car off of your hands. Your car doesn’t come off so easy, but recycling it is for the best because it can become something useable again.

Learn More

Should You Reuse Or Recycle An Old Computer?

Unless you’re a computer repair or computer design professional, it’s hard to understand the true shelf life of a modern computer. There’s all kinds of generic sayings and measurements, such as the age of a computer or specific parts, but they’re all inaccurate without calculating the sum to get the usefulness of the whole. Before you throw everything out, here’s a glance at some of the most important parts in the computer, how they relate to current usefulness and how you can recycle what you don’t need.

What Makes A Computer “Modern”

A computer’s modernity is not based on when it was released, but how well it handles the most recent and demanding software. For most users, a computer needs to be able to handle the software used. New software is developed every day, which brings both computer parts and software into a vicious cycle.

Computers are made to perform calculations and tasks. Software is made to take advantage of the computer’s performance. New hardware is released that is faster and better at handling software, and new software is developed to challenge those limits. You don’t have to upgrade with every small change, but many computer users may rely on simple software that may not change often–only to find themselves too obsolete to upgrade cheaply when new versions are needed.

The best way to know your computer needs is to look at the software you’re using. Find the recommended system requirements for your software, even if you don’t plan on upgrading to that version. This is helpful, since the recommended requirements involve running your new software and modern operating systems such as Windows or Macintosh, meaning that you’ll be at general, modern performance levels. Avoid the minimum requirements, as this can create a cycle of small, expensive upgrades.

If your computer can’t handle the newest software without two or three component upgrades, it’s best to recycle the old system and get a newer one. Depending on recycling rates for aluminum, copper, gold or rare earth magnets, you could get a decent amount of money for your upgrade through recycling.

Upgrading By Parts And Their Recyclable Potential

To understand upgrade needs and recycling potential, here’s a list of the parts that software is often dependent on, plus a few parts that are related.

  • Processor. The processor is the “brains” of a computer because it performs the calculations needed to start up, run programs, save information and generally exist in a useful state. Processors are small, with gold pins that can be recycled. Processors also usually have an aluminum block with fins called a heat sink, which can be recycled. 
  • Memory. Random Access memory or RAM is used to deliver the most commonly-used files between the processor and hard drive instead of slowly searching across the entire hard drive for files used thousands of times per second. RAM has gold contacts, and can be easily stored for recycling as the memory sticks are quite sturdy.
  • Hard drive. The hard drive for computers have thick cases made of aluminum. They can be deceptively heavy, as some of the weight comes from the glass-like platters used for storage in platter-based drives. Hard drives also have rare earth magnets if they are platter based. Solid state drives do not have platters, and are mostly recycled for their metal content and circuitry.

To make recycling easier, contact a recycling services professional for multiple bins for multiple recyclable components, or for pickup scheduling from a company like B-P Trucking Inc to take your computers and other electronics to the proper recycling center. 

Learn More

4 Steps To Turn Your Construction Debris Into Scrap Cash

Whether you are doing a remodeling job or another construction project, there is a lot of debris that you are going to have to deal with. Do you want to avoid extra costs for getting this waste cleaned up? Maybe you want to put a little spare cash in your pocket. With these few steps, you will be able to turn that construction waste into scrap cash:

Step 1: Going Green, Reusing And Reclaiming To Save

When you start your project, go green from the start and consider resources like reclaimed construction materials. You may also want to reuse materials that you have around a project site to reduce costs. Also, if you are doing a remodeling project, save any materials in good condition that you are not going to use. Many of these materials can be sold later or used on another project that you do.

Step 2: Getting Organized To Keep Materials In Their Place

Organization is important, and once you start a project, you will want to keep materials separated. For building materials like windows, doors and appliances, you may want to consider renting a small container for storage. In addition, rent separate waste containers for recycling. You can keep wood and other non-metals separate from containers with metal.

Step 3: Cleaning Up Materials To Get Them Ready For The Recycling Bin

When recycling any materials, you will want to clean them up. If you have materials like copper wiring, then remove the insulation and make sure that the metal is pure copper with no added waste to get the most for it. In addition, it is also a good idea to clean up any building materials that you plan on reselling or using, which means removing nails, fasteners and any waste materials that may be attached to things like windows.

Step 4: Get Cash Back Quickly By Selling Any Leftover Metal Scrap

Some of the materials you save from your project may not give you an immediate financial benefit. Metal, on the other hand, can be a great resource for quick cash. You can take any scrap metals directly to a recycling service for quick cash. Separate the metals to ensure you get the best price for materials like brass, copper and aluminum, which have a higher value than most tin and steel materials.

These are some steps you can take to get the most out of your construction waste and turn that scrap into cash. If you have metals to clean up, contact a metal recycling service, such as Industrial Services Inc, to help you with cleaning up the mess and putting some cash back in your project.  

Learn More

Other Uses For Recyclables

If you are gathering up your recyclables, you want to make sure you pull some aside so you can use them for other purposes around your house. There are many uses for both tin and aluminum cans. Learn about some of the things you can do with these cans by reading this article.

Make a ladybug pencil holder out of a tin can

You can turn a tin can into a decorative ladybug pencil holder in just a few simple steps. The first thing you want to do is to clean and dry the tin can. Then, paint the outside of it red with black spots. Paint a face on the front of the tin can and allow the paint to dry. Once it is dry, you can put your pencils and pens in it. This pencil holder will make a great addition to your desk. Also, keep in mind that you can also create other animals and bugs by painting the can differently.

Make a decorative planter

You can make a decorative planter out of a tin can by punching a few holes in the bottom of the can. Then, paint the outside of the can any way you want. You can paint it one solid color, or even paint flowers on it. Also, paint a small saucer to match the can. Once all the paint has dried, add potting soil and whatever it is you are going to be planting into the planter. Set the planter on the saucer, so the water will drain out the holes and onto the saucer. Add the appropriate amount of water and set it where it will get the proper amount of sunlight.

Make a knock-down game out of aluminum cans

You can make a fun knock-down style game with 10 aluminum cans. The first thing you want to do is to fill each can with sand. Then, use duct tape to completely tape the tops of the cans so no sand can come out. Then, paint the outsides of the cans, if you want. If you have painted them, wait for the paint to dry all the way. Once it is dry, you can stack the cans with 4 on the bottom, then 3, followed by two and a final one on top. Now, you can use a softball to try to knock the cans down. The person who knocks down the most wins that round.

Once you have picked out all the recyclables you can use, then you can take the rest of them down to the nearest recycling center. Click this link to learn more about your recycling options.

Learn More

Steps To Take When Renting A Rolloff Dumpster

Rolloff dumpsters can be very helpful to have on hand during home projects such as minor remodeling projects. Many homeowners aren’t familiar with the process of renting a rolloff dumpster; here are some of the steps you must take to make this process successful. 

Make Sure it’s Legal

Before you look for companies to rent a rolloff dumpster from, you’ll need to check with a few authorities to make sure it’s going to be legal. First of all, check with your local homeowner’s association and the agreements you signed when moving in; you might need to get special permission to place a rolloff dumpster on your sidewalk or street. They may even need to approve dumpsters in your own driveway, since they can affect the visual appeal of your neighborhood. 

It’s also a good idea to check with the local authorities. If you’re going to put your dumpster on the street, you might need to apply for a permit. The government may need to put up official signs blocking off the parking areas around your dumpster so that it can be easily removed. 

Know What You Need

It’s also good to note that rolloff dumpsters are most frequently used in construction projects and other larger endeavors, so the rolloff dumpster companies may be more used to dealing with professionals. It’s important to do some research before you contact the company to make sure that you understand what kind of container you need. For instance, what size dumpster do you need? If you’re unsure, you might want to start with a ten yard container, referred to as a “ten yarder” in the biz. Sizes up to forty yards might be appropriate for larger home remodels. 

Make Sure to Keep the Area Clean

Another thing that you may not prioritize as a first time renter is keeping the area in front of your rolloff dumpster clear. If your dumpster begins to overflow, don’t pile more stuff in front of it, for instance; what’s likely to happen is that the dumpster doesn’t get picked up at all. Instead, call for an early pickup if you need it. Rolloff dumpster companies should be able to help work around your schedule and needs with enough advance warning.

With the right rolloff dumpster company, you can make the process of remodeling a home much more convenient by avoiding the hassle of hauling away your used materials. 

Learn More